Kingston FURY Renegade G5 2TB M.2 PCIe 5.0 NVMe SSD
High-performance 2TB PCIe 5.0 NVMe storage for compatible systems
The Kingston FURY Renegade G5 SFYR2S/2T0 is a 2TB internal solid-state drive using a PCIe 5.0 x4 interface and NVMe protocol. It uses the M.2 2280 form factor for installation in compatible desktops, workstations, and other systems with an M.2 PCIe slot. The drive delivers sequential read speeds up to 14,700 MB/s and sequential write speeds up to 14,000 MB/s. It uses 3D TLC NAND and is rated for up to 2,000 TB written. PCIe 5.0 operation requires a compatible host platform and adequate thermal management. The drive can also operate in systems that support compatible lower-generation PCIe interfaces, with performance limited by the host platform.
Technical Specifications
| Part Number | SFYR2S/2T0 |
| Manufacturer | Kingston |
| Series | FURY Renegade G5 |
| Type | Internal NVMe SSD |
| Form Factor | M.2 2280 |
| Interface | PCIe 5.0 x4 |
| Protocol | NVMe |
| Capacity | 2TB |
| NAND Type | 3D TLC |
| Sequential Read | Up to 14,700 MB/s |
| Sequential Write | Up to 14,000 MB/s |
| Random Read | Up to 2,200,000 IOPS |
| Random Write | Up to 2,200,000 IOPS |
| Endurance | 2,000 TBW |
| Dimensions | 80 x 22 x 3.5 mm |
| Warranty | 5 years |
2TB M.2 2280 SSD with a PCIe 5.0 x4 interface and NVMe protocol.
Sequential performance reaches up to 14,700 MB/s read and 14,000 MB/s write.
Requires a compatible M.2 PCIe slot and suitable thermal management for sustained workloads.
Which systems support the Kingston FURY Renegade G5 SFYR2S/2T0?
It is intended for desktops, workstations, and other systems with an M.2 2280 slot supporting PCIe 5.0 x4 NVMe storage. Check the system or motherboard documentation for slot generation, boot support, and physical clearance.
Can this SSD operate in a PCIe 4.0 M.2 slot?
Yes, the drive can operate through a compatible lower-generation PCIe interface, but link speed and storage performance will be limited by the host platform.
Does the drive include an integrated heatsink?
The SFYR2S/2T0 is an M.2 2280 module. Use the motherboard M.2 heatsink or an approved compatible heatsink when required for sustained PCIe 5.0 workloads.
What performance does the 2TB model provide?
The drive is rated for sequential read speeds up to 14,700 MB/s and sequential write speeds up to 14,000 MB/s. Actual results depend on the host platform, workload, temperature, and available cooling.
What endurance and warranty apply to this model?
The 2TB model is rated for up to 2,000 TB written and includes a five-year warranty.
Are special drivers required?
Standard operating system NVMe support is normally sufficient. Install current motherboard firmware and storage-related updates recommended by the system manufacturer for best compatibility.