Kingston NV3 500GB M.2 2230 PCIe 4.0 NVMe SSD
Compact PCIe 4.0 NVMe storage for compatible client systems
The Kingston NV3 500GB is a compact M.2 2230 NVMe solid-state drive for systems that require a short 30 mm storage module. It uses a PCIe 4.0 x4 interface and supports the NVMe protocol, providing substantially higher throughput than SATA-based storage when installed in a compatible slot. The drive offers 500GB of formatted capacity, sequential read speeds up to 6,000 MB/s, and sequential write speeds up to 3,000 MB/s. Its single-sided M.2 2230 format is suited to space-constrained client computers, selected handheld gaming systems, and other devices with PCIe NVMe support. System compatibility depends on the host device's physical clearance, mounting provision, firmware, and PCIe lane configuration.
Technical Specifications
| Part Number | SNV3SM3/500G |
| Manufacturer | Kingston |
| Type | NVMe solid-state drive |
| Form Factor | M.2 2230 |
| Interface | PCIe 4.0 x4 |
| Capacity | 500GB |
| Protocol | NVMe |
| NAND Type | 3D NAND |
| Sequential Read | Up to 6,000 MB/s |
| Sequential Write | Up to 3,000 MB/s |
| Endurance | 160 TBW |
| Dimensions | 22 x 30 x 2.3 mm |
| Operating Temperature | 0 to 70 degrees C |
| Supported Systems | Systems with an M.2 2230 PCIe NVMe slot |
| Warranty | Limited 5-year warranty |
M.2 2230 form factor fits compatible compact computers and handheld systems.
PCIe 4.0 x4 interface delivers sequential reads up to 6,000 MB/s.
Verify device mounting, firmware, and NVMe compatibility before installation.
Which systems support the Kingston NV3 500GB M.2 2230 SSD?
It is compatible with systems that provide an M.2 2230 slot with PCIe NVMe support. Confirm the host device's physical mounting point, firmware support, and PCIe generation before purchase.
Can this SSD be installed in an M.2 2280 slot?
The drive is 30 mm long and is designed for M.2 2230 mounting. It should only be installed in a 2280 slot if the system provides a supported mounting position for the shorter module.
Will the drive operate in a PCIe 3.0 system?
A PCIe 4.0 NVMe SSD can operate in a compatible PCIe 3.0 slot, but performance will be limited by the host system's PCIe 3.0 bandwidth.
What performance does the 500GB model provide?
The rated sequential performance is up to 6,000 MB/s for reads and up to 3,000 MB/s for writes. Actual results depend on the host platform, workload, firmware, and available thermal headroom.
Are special drivers required?
Modern Windows and Linux systems generally provide native NVMe support. Install current platform firmware, chipset drivers, and operating system updates when required by the host manufacturer.